 |
|
|
|
Dimensions
|
|
SAE FACE
|
C
|
B2
|
5 in
127.0 mm
|
E |
13.24in
336.3mm |
J2 |
0.635-11 in
15.9 mm |
|
SAE SPLINE
|
C |
C1
|
0.5 in
12.7mm
|
F |
1.39in
35.2mm |
K |
7.28 in
185.0 mm |
|
A1
|
2.19 in
55.5 mm
|
C2
|
0.53in
13.5mm |
G |
1.99 in
50.5 mm |
L1 |
0.562 in
14.3 mm |
|
A2
|
2.25 in
57.2 mm
|
D1
|
0.76in
19.4mm |
H |
7.125 in
181.0 mm |
L2 |
0.688 in
17.5 mm |
|
B1
|
5 in
127.0 mm
|
D2
|
0.78in
19.8mm |
J1 |
0.50-13 in
12.7 mm |
M |
4.508 in
114.5 mm |
|
The torque capacity of the clutch is directly proportional to the operating pressure. Maintaining the lowest pressure possible to transfer the desired torque will enable the clutch to run cooler and extend the life span of the internal bearings.
|
PTO 750 Series Static Torque Ratings
|
|
PSI (Ratings in ft. lbs.)
|
|
Model
|
80
|
90
|
100
|
110
|
120
|
|
750
|
765
|
888
|
1011
|
1134
|
1257
|
|
PTO 750 Series Static Torque Ratings
|
|
PSI (Ratings in ft. lbs.)
|
|
Model
|
5.5
|
6.2
|
6.9
|
7.5
|
8.3
|
|
750
|
1037
|
1204
|
1371
|
1538
|
1704
|
|
PTO 750 Series Shaft Options
|
|
Input Shaft / External
|
Output Shaft / Internal
|
|
*SAE C 14T/12-24 D.P.
|
*SAE C 14T/12-24 D.P.
|
|
1.250 Diameter with .312 Keyway
|
|
|
PTO 750 Specifications
|
|
|
U.S.
|
S.I.
|
|
*Rated Torque (Maximum)
|
750 Ft/Lbs
|
1017 Nm
|
|
Maximum HP
|
429 HP
|
320 Kw
|
|
*Maximum RPM
|
3000 RPM
|
3000 RPM
|
|
Rotation
|
Bi-rotation
|
Bi-rotation
|
|
Manual Engagement
|
Standard
|
Standard
|
|
Maximum Actuation Pressure
|
120 psi
|
8 Bar
|
|
Minimum Actuation Pressure
|
80 psi
|
6 Bar
|
|
Displacement (Maximum)
|
14 in3
|
230 cm3
|
|
Minimum Flow Rate Required
|
6 GPM
|
22 Liters
|
|
Operating Media at Clutch (Oil or Air)
|
Standard
|
Standard
|
|
Maximum Back Pressure to Tank
|
7 psi
|
0.5 Bar
|
|
Maximum Fluid Temperature
|
180 F
|
82 C
|
|
Material - Flanges
|
Aluminum
|
Aluminum
|
|
Shaft
|
Alloy Steel
|
Alloy Steel
|
|
Housing
|
Aluminum
|
Aluminum
|
|
External Finish - Flanges
|
Anodized
|
Anodized
|
|
Shaft
|
Alloy Steel
|
Alloy Steel
|
|
Housing
|
Anodized
|
Anodized
|
|
Maximum Overhung Load at Bearing
(Bracket Supported Female End)
|
200 Lbs
|
90.8 Kg.
|
|
Weight (Approximate)
|
53 Lbs
|
24 Kg.
|
|
|
*Standard Configuration. Modified Standards Available.
|
* Consult Logan for applications that require lower actuation pressure or increased torque and rpm requirements.
|
|
|