Bell Housing PTO - Pump Mount Series
QUICK REFERENCE CHART
Model
Number		 SAE Housing Size Max. Input Speed (RPM) Torque Capacity @100 PSi (Lbs.-Ft. Torque Capacity @200 PSi (Lbs.-Ft. HP Range Max. Pump Capacity @1500 PSI (GPM)
LC-110-PM 3 2850 200 400 100 100
LC-111-PM 3 2850 225 455 175 175
LC-111-PM 2 2850 225 455 175 175
LC-211-PM 2,3 2850 450 900 300 300
LC-211-PM 2,3 2850 450 900 300 300
LC-311-PM 2,3 2850 665 1330 375 375
LC-214-PM 1 2500 810 1620 375 375

 

Pump Mount Series Description:

Bell Housing pump-mount PTO’s are air or fluid actuated and designed to mount on to an SAE No. 1 to No. 3 flywheel. Torque ranges are from 200 to 1,620 lb. ft. Horsepower Ranges from 100 to 375 HP.

Standard Specifications:

Single pump units are available in No. 1 to No. 3 size SAE Bells with input torque ranges from 200 lb. ft. (271 Nm) to over 1620 lb. ft. (2196 Nm).

Air/Fluid operating pressures range from 100 (6,9 bar) to 200 psi (13,8 bar) for standard models.

Operating speeds are up to 2,850rpm.

Pump Mount Flanges:

Pump mount PTO’s are available from
SAE B to SAE D flanges.

Pump Mount Shafts:

PTO shafts are available in B, B-B, C, C-C, D,E, and F configurations. Modified Standards are available to meet specific
customer needs.

Pump mount shaft diagram
Dimensions (Inches)
Model No. A B C D E F G
 H
LC-110-PM 17.75 16.125 11.625 12.375 2.125 6.79 16.875 12 x .406
LC-111-PM 17.75 16.125 13.125 13.875 1.56 6.79 16.875 12 x .406
LC-111-PM 19.25 17.625 13.125 13.875 1.56 10.16 18.375 12 x .406
LC-211-PM 17.75 16.125 13.125 13.875 1.56 10.16 16.875 12 x .406
LC-211-PM 19.25 17.625 13.125 13.875 1.56 10.16 18.375 12 x .406
LC-311-PM 17.75 16.125 13.125 13.875 1.56 10.16 16.875 12 x .406
LC-214-PM 21.75 20.125 17.25 18.375 1 10.16 20.875 12 x .531
Pump Mount Flanges SAE J744 / ANSI B96.6-1972
SAE Flange Code
 Pilot Dia.
 Mounting Bolt Circle
 Mtg. Holes
 Mount Hole Dia.
 ANSI Flange Code
SAE B 4.000 5.000 4 0.562 100
SAE B 4.000 5.750 2 0.562 175
SAE C 5.000 6.375 4 0.562 175
SAE C 5.000 7.125 2 0.688 300
SAE D 6.000 9.000 4 0.812 300
Pump Mount Shafts SAE J744 / ANSI B96.6-1972
SAE Shaft Code
 Shaft Dia.
 Shaft Length
 Spline Specifications
 ANSI Shaft Code
B-B 0.875 1.312 13T 16/32 DP 22-4
B-B 1.000 1.500 15T 16/32 DP 25-4
C 1.250 1.875 14T 12/24 DP 32-4
C-C 1.500 2.125 17T 12/24 DP 38-4
D,E 1.750 2.625 13T 8/16 DP 44-4
F 2.000 3.125 15T 8/16 DP 50-4

Bell Housing PTO’s for Single and Double Pump Drives

Logan PTO clutches are designed to retrofit within existing bell housings of popular pump drive manufacturers such as:

  • Funk
  • Twin Disc®
  • Durst
  • Gear Products
  • Marco
Complete Logan PTO clutches are available as original equipment or as a field retrofit.		 Funk 2800 series - Logan LC-110 hydraulic clutch Funk 2800 series double direct drive pump with Logan LC-211 hydraulic clutch
  Funk 2800 series, single direct drive pump SAE#3 housing and B pad (retrofitted with Logan LC-110 Hydraulic clutch) Funk 2800 series, double direct drive pump SAE#3 housing and B pad (retrofitted with LoganLC-211 hydraulic clutch)
0