Logan Hi-Lo Retrokit for your Acme Gridley, Hilo retrokit

New Logan Hi-Lo Retrokits

For Your BSA
NOW BETTER THAN EVER!


Calculate your savings

Optimize Your Early And Late-Model
BSA With New Logan Hi-Lo Retrokits!

New Logan Hi-Lo Retrokits for your early and late-model BSA's increase your machines daily and weekly output from 10-20% - leaving you
room for additional capacity, productivity and profitability. Positive, fast-acting Logan Clutch engagement enables your Acme to change speeds much faster, and provides a more consistent and accurate cycle time than conventional mechanical clutches.

Hi and Low spped in screw machine gearbox

Hi-Lo Retrokit for your 1 RA-6 BSA
Simplifies Machine
Set-up

Set-up personnel can position tools closer to the work piece, and reduce dwell time due to repeatable high and low-speed clutch engagement.

Guaranteed Cycle
Time Repeatability

We replace your 1940s vintage mechanically actuated high-speed and feed clutches, roll clutch, band brake, linkages, pins and lever arms with air-actuated, self-adjusting Logan clutches. By making the switch from mechanical to Logan, you'll increase your machines, daily and weekly output significantly, through consistent and accurate speed changes and decreased maintenance.

Even better - Our quick-stop power-applied brake prevents coasting and provides accurate braking for bar loader positioning during feed-out.

 

 Hi-Lo Retrokit Features:
  • Reduces idle time between speed changes.
  • Replaces mechanical clutches, roll clutch, band brake and linkages with fast-acting air-actuated Logan Clutches.
  • Positive, crisp Logan Clutch engagement
    guarantees cycle time repeatability.
  • Simplifies clutch maintenance -No disc pack adjustment or slippage.
  • Quick-stop, power-applied brake -Prevents machine coasting.
  • New! Low-speed clutch design reduces idle time. Machine operates more consistently.

Savings:

  • Increase productivity from 10-20%.
  • Tools can be positioned closer to the work
    piece due to repeatable high and low-speed clutch engagement.
  • Better machine utilization -
    More productivity from existing machines, operators and floor space.

gearbox brake
Power applied brake! Ideal for bar loaders or for manual stock positioning

Multi disc air clutch
Self-adjusting disc packoperators and floor space. eliminates the need for mechanical adjustment.

New style gearbox

An overhead view of High-Speed and Low-Speed feed
clutches, drive and brake cups, spacers, fittings, etc. supplied with the mechanical portion of your Hi-Lo Retrokit. (1 RA-6 shown)

 

 

 Additional Benefits
  • Self-adjusting disc pack simplifies clutch maintenance
  • Eliminates, linkages, lever arms, yokes, pins, etc.
  • More than twice the torque to move your stock reel, and
    accurate braking optimizes your bar loader investment

Old mechanicl style

 

Mechanical Vs. Logan
Cycle time savings

BSA equipped with Old-Style Mechanical Clutches, Band Brake, Roll Clutch and Linkages

 

BSA with Logan Hi-Lo Retrokit
* Idle time reduced further with Logan Indexer

 

Justification Worksheet for your BSA

Production time = 16 Hours/Day (70% Efficiency or Run Time)
BSA 1-1/4 RA-6 Cycle Time With
Mechanical Only

Cycle time with
Logan Retrokit

 % Increase with Logan Hi-Lo Retrokit

Cycle Time (#seconds per part)

7.00

 6.30 10.0%
Parts per minute (x0.7) 6.00 6.67 0.67
parts per hour 360.00 400.00 40.00
Parts per shift (8 hrs.x0.7) 2,880.00 3,200.00 320.00
Parts per day (2 shifts) 5,760.00 6,400.00 640.00
Parts per week (5 days) 28,800.00 32,000.00 3,200.00
Parts per year (50 weeks) 1,440,000.00 1,600,000.00 160,000.00
Revenue @ 0.15 per part $216,000.00 240,000.00 $24,000.00

Additional partsproduced per year - with Hi-Lo Retrokit
160,000

Total added revenue to companies top line, utilizing existing machine, operator and floor space
$24,000.00

Above calculation based on 10% increase in


Logan Hi-Lo Retrokits For Your Early and Late-Model BSA!

Calculate your savings

Each Logan Electrical, Mechanical, Pneumatic and Accessory kit is designed to save you time and money during installation. Kits are furnished with detailed mechanical, electrical and pneumatic schematics.

Simple to Install:

  • Easily retrofit older machines.

  • Field installation service is also available.

  • Simplifies addition of stock depletion, broken-tool and short-part detectors.

Hi-Lo Retrokit Control Options

standard cams and limit switches
1. Standard Cams and Limit Switches

Feature:

  • Conventional Cam and limit Switch operation

cs 2001xt16 microprocessor control
2. CS 2001XT16 Microprocessor Control

Popular Features:

  • Easy to read 2-line screen Displays cycle time, parts count, machine position in degrees

  • Machine Lockup detection -

  • low-speed shift points in degrees

  • Thread Check - detects tap failure and shuts down your machine before index

  • 15 programmable tool counters

  • Eliminates auxiliary cams and limit switches

  • Stock Load positioning - reduce stock-up by 50%

  • LoganNet communication-ready

Plus many more features - call for details

cs 2003 Micro-processor Control
3. CS 2003 Micro-processor Control

All the features of the XT16 plus:

  • Full pre-wired push-button control station

  • Eliminates relay logic

  • 35 Programmable Tool Counters

  • Air coolant, lube pressure monitor capability

  • LoganNet 2.0 uptime, downtime analysis

Plus many more features - call for details
   
0