spindleCarrier

Screw Machines
Calculate Your Savings for Hi-Lo Retrokits
Literature Download
28855 Ranney Parkway
Cleveland Ohio 44145

Toll Free 800.525.8824
Phone 440.808.4258
Fax 440.808.0003
Spindle Carrier
Home > Screw Machines > Acme Gridley > Spindle Carrier

 

National Acme cartoon

Click here to calculate your savings

New Logan Spindle Carrier Indexing kits make it easy for you to increase productivity and reduce the idle time on your Acme Gridley up to 25%. How? Its simple - We replace the older Geneva-style indexing mechanism, spiral bevel gears, and Indexing arm on your Acme with our smooth, faster acting Logan Indexer, Fast Bevel Gears and Heavy-duty Indexing Arm. The Logan Indexer has a unique parabolic curve, and improved cam follower design which gives your Acme a smoother transition during index - all without sacrificing productivity. Better indexing actually reduces the input torque required to index your Acme by 75%!

Reduce Idle Time Between Gear Changes:
Increase Capacity and Profitability More Productivity from Existing Machines,Floor Space and Operators.

Better Machine Utilization Lower Maintenance CostsBest of All - You can retrofit your Acme-Gridleywith a Logan Indexer right on your shop floor.

Cyclo Index kit
Indexer Kit hardware
and accessories

high speed bevel egars
Spiral bevel gears

Smooth, faster acting Logan Spindle Carrier Indexing Kits for your Acme-Gridley.
Index up to 25% faster - save time, money and increase productivity
Reduce idle time between speed changes - more capacity and profitability
Requires 75% less input torque - reduces maintenance costs
Improved, longer lasting cam follower design
 
Factory or Field Retrofitted
Factory trained service technicians are available to install or guide your staff through installation- No need to wait for a new or rebuilt Machine. For best results, we recommend installation on machines already equipped with Logan Hi-Lo Clutches.
potential benefits of retrofitting old technology with logan products

Old Technology How it Works
Conventional Machines, even up to a few years ago, utilized 1940s vintage mechanical drive clutches, a band brake, and an older Geneva-style indexer with standard spiral bevel gear arrangement. Result: Reaction time between speed changes and index time is sluggish. New Technology - Cycle Time Savings
Consistent, positive Logan High and Low Speed Clutch engagement allows your screw machine to change speeds much faster than mechanical clutches we eliminate coasting, mechanical linkages and the band brake too!
Logan Indexers and fast bevel gears reduce machine idle time up to 25% and give your Acme a faster, smoother transition during index. 75% less input torque puts less wear and tear on your machine.
Acme-Gridley
Machine
Model No.
*Idle Time
Without
Logan Indexer
or Retrokit
Idle Time With
Logan Indexer
Fast Bevel
Gears and
HI-Lo Retrokit
Idle Time
Reduction
In Seconds
% Reduction
Idle Time
9/16 RA-6
3/4 RA-8
1 RA-6
1-1/4 RA-6
1-1/4 RB-8
2 RB-6
1-5/8 RB-6
1-5/8 RBN-8
2 RB-8
1-5/8 RB-8
2-5/8 RB-6
2-5/8 RB-8
1.23 sec.
1.44
1.23
1.70
2.00
2.87
2.87
2.00
2.36
2.36
2.83
2.79
.92 sec.
1.21
.92
1.31
1.62
2.26
2.26
1.62
1.88
1.88
2.26
2.22
0.31 sec.
0.23
0.31
0.39
0.38
0.61
0.61
0.38
0.48
0.48
0.57
0.57
25%
16%
25%
23%
19%
21%
21%
19%
20%
20%
20%
20%

 

Justification Worksheet For Your Acme-Gridley
Production time = 16 Hours/Day (70% Efficiency or Run Time)
Acme-Gridley 1-1/4 RA-6
Cycle Time With
Mechanical Only
Cycle Time With
Logan Retrokit
% Increase With Logan
Hi-Lo Retrokit Only
Cycle Time With
Logan Hi-Lo Retrokit
and Indexer
% Increase With
Logan Hi-Lo Retrokit
And Indexer
Cycle Time (#seconds per part) 7.00 6.30 10.0% 5.91 18.4%
Parts per minute (x 0.7) 6.00 6.67 0.67 7.11 1.11
Parts per hour 360.00 400.00 40.00 426.40 66.40
Parts per shift (8 hrs.x 0.7) 2,880.00 3,200.00 320.00 3,411.17 531.17
Parts per day (2 shifts) 5,760.00 6,400.00 640.00 6,822.34 1,062.34
Parts per week (5 days) 28,800.00 32,000.00 3,200.00 34,111.68 5,311.68
Parts per year (50 weeks) 1,440,000.00 1,600,000.00 160,000.00 1,705,583.76 265,583.76
Revenue @ $0.15 per part $216,000.00 $240,000.00 $24,000.00 $255,837.56 $39,837.56

 
Additional Parts Produced Per Year with Hi-Lo Retrokit and Indexer

Additional Revenue with Logan Hi-Lo Retrokit Only

Additional Revenue when Adding an Indexer to a Machine Equipped with a Hi-Lo Retrokit

Total Added Revenue to Companies Top Line, Utilizing the Same Machine, Floor Space, Operator, etc.

265,583.76 pcs.


$ 24,000.00

$15,837.56


$39,837.56
Above Calculation Based on a Conservative 10% Increase in Productivity -Varies by Machine Condition