New! Roll Clutch Removal Feature Increases Productivity
Mechanical Roll or Rollaway clutches have a tendency to slip and grab at different points during speed changes and indexes. This causes expensive tool breakage and downtime when the machine goes past low-point in high-speed. Because Logan clutches improve cycle time repeatability, our new low-speed clutch feature replaces the old-style roll clutch. This enables set-up personnel to position tools closer to the workpiece, further reducing dwell time and overall cycle time.
An overhead view of high-speed and power-feed clutches, drive and brake cups, spacers, fittings, etc. supplied with the mechanical portion of your Hi-Lo Retrokit.
Old technology, mechanical high-speed clutch with lever arm and bronze cone brake.
Production time = 10 Hours/Day (70% Run Time) |
|||
---|---|---|---|
New Britain Model 51 | Mechanical Only | W/Logan Retrokit | Productivity Increase |
Cycle Time (#seconds per part) |
6.50 | 5.85 | 10.0% |
Parts per minute |
6.46 | 7.18 | 0.72 |
Parts per hour |
388 | 431 | 43 |
Parts per shift (10 hrs. x 0.7) |
3,877 | 4,308 | 431 |
Parts per day (1 shift) |
3,876.92 | 4,307.69 | 431 |
Parts per week (5 days) |
19,384.62 | 21,538.46 | 2,153.85 |
Parts per year (50 weeks) |
969,230.77 | 1,076,923.02 | 107,692.31 |
Revenue @ $0.19 per part | $184,153.85 | $204,615.38 | $20,461.54 |
Above calculation based on 10% increase in productivity - Varies by machine vintage
Call today for your Free Logan justification worksheet or visit our web site and input your own production data
View of factory assembled valve manifold, pressure regulator, hose and fittings.
Kits vary, based on machine configuration.
1. Standard Cams and Limit Switches
Feature:
Conventional Cam and limit Switch operation
2. CS 2001XT16 Microprocessor Control
Popular Features:
Easy to read 2-line screen Displays cycle time, parts count, machine position in degrees
Machine Lockup detection -
low-speed shift points in degrees
Thread Check - detects tap failure and shuts down your machine before the index
15 programmable tool counters
Eliminates auxiliary cams and limit switches
Stock Load positioning - reduce stock-up by 50%
LoganNet communication-ready
Plus many more features - call for details
3. CS 2001 Microprocessor Control
All the features of the XT16 plus:
Full pre-wired push-button control station
Eliminates relay logic
35 Programmable Tool Counters
Air coolant, lube pressure monitor capability
LoganNet 2.0 uptime, downtime analysis
Plus many more features - call for details
Click on your machine for model-specific information
Model 51
Model 52
Model 60
Model 61
Model 615
Model 62
Model 656
Model 657
Model 665
Model 81